'World's First' Home-Use Four-Needle Embroidery Machine Janome MB-4S Four Needle Embroidery Machine. We've taken everything you love about Janome embroidery and.

If you’re new to sewing, you might be wondering whether it’s worth it to invest in an expensive, premium sewing machine or if you should stick to an inexpensive machine. And if you’ve been sewing for quite a while and are still using a budget machine (like me!), you might have the same question. Last month I got the chance to try out the Janome Skyline S5, a truly premium sewing machine, for a few weeks, and I think I’ve figured out the answer to that question.

I’ll tell you a little bit about this machine and compare it to the budget machine I currently sew on to help you decide if it’s worth it to invest in an expensive sewing machine. Note: there are some affiliate links in this post. I do most of my sewing on a super inexpensive Brother sewing machine (you can get an for under $150).

For the most part, it works just fine. My older version really doesn’t have any bells and whistles, but the thing sews! And I’ve been able to create a lot of garments over the past few years with it – for what I paid, it’s been a great little machine. When Janome asked me to try out their new Skyline S5, which has an MSRP of $1499, I figured this better be some kind of amazing sewing machine. I knew it would be better than what I was used to, but a sewing machine’s a sewing machine, right? As I spent a few weeks sewing with the Skyline, I realized that 90% of my sewing frustration comes from using a budget machine, and that if I ever had the chance to sew on the Skyline full time, I’d likely be sewing all. (The other 10% of my sewing frustration comes from my own stupidity, in case you were wondering.) The difference between a budget sewing machine and a premium machine comes down to 2 things in my opinion: 1) premium machines are much more automatic, and 2) premium machines are much more customizable. Sewing is quite repetitive and extremely detail oriented, so anything that can be automated by a machine is not only handy, it also contributes to a better looking final product.

For example, I hate making buttonholes on my machine. I have to do everything manually, and it’s hard to get things to line up right and look good. The Janome has a completely automatic buttonhole plate that makes buttonholes a breeze (you don’t even have the measure anything – you just place the button you’ll be using in the plate and it figures everything out for you!). Lots of other things are automated, too, like auto locking stitches at the end of each seam so you don’t have to backstitch, and threads that automatically get pulled to the backside of the fabric and clipped for you. I’m kind of a lazy seamstress, so I loved all the things this machine could do for me. It’s full of features and details that made sewing simpler and more enjoyable. Sewing is also full of lots of different situations.

The same settings and stitches that work great on cotton fabric are terrible for knit fabric, and the same method for hemming a gathered skirt doesn’t work so well for a circle skirt, etc. So the ability to customize how the machine sews is really wonderful, and will eliminate most of the frustration involved in sewing. For example, sewing on knits can be really tough on basic machines because knit fabric often gets stretched out as you sew, making it look terrible, and you can’t use a normal straight stitch or the seams will pop when the garment is worn. The Janome Skyline S5 has all sorts of extra features to make sure this won’t be a problem: you can reduce the pressure on the foot so fabric doesn’t get stretched out; it comes with an even feed foot to make sure the fabric feeds nicely, and it has a super durable stretch stitch that looks like a straight stitch but stretches beautifully (no more popped seams!). You can change and customize just about every part of the sewing experience with this machine: stitch length, stitch width, pressure, tension, feed dogs up or down, etc. You can even sew using a knee bar instead of a presser foot if you want!

And that’s not even mentioning the hundreds of different stitches you can easily choose using the digital controls (including the entire alphabet!). Add in a different foot for every different thing you’d like to do, and this machine really makes sewing easy. When I realized how much this machine could do I was worried it would take me forever to figure out how to use it, but 10 minutes out of the box I was sewing my kids’ names into scrap fabric. The instruction manual is very easy to follow and I felt familiar with the machine very quickly. Can you tell I love it? I don’t want to send it back! Maybe they just won’t notice if I keep it If you quilt, you’ll love this machine. It comes with a quilting guide bar for quilting parallel lines, has automatic stippling and clasp stitches, and has specific settings to make free motion stitching simple.

There’s even a few special stitches made to look like hand quilting. So, back to the original question: is it worth it to buy an expensive sewing machine? Well, the answer is that it depends. If you’re just starting out and you aren’t sure whether you’ll love sewing, or would both be great options for a starter machine at about $150.

Either one would be a great way to get introduced to sewing without a huge investment. But if you’ve been sewing for a while and you have the funds, I’d definitely recommend a premium machine like the Janome Skyline S5. If you sew regularly, you’ll save huge amounts of time and frustration by upgrading to a nicer machine. It’s certainly a splurge, but if you have the option, wouldn’t you like to splurge on something that will make the hobby you already enjoy even more enjoyable? I can only imagine how much more I would have enjoyed sewing when I first started learning if I’d had a machine like this to work with. If you want to learn more about the Janome Skyline 5S,. So, are you interested in seeing what I used the Janome Skyline to make?

I sewed up this holiday party outfit for my daughter that’s featured in the newest issue of: I was a little nervous about hemming that full circle skirt made from slippery material, but it was an absolute breeze with the rolled hem foot on the Janome. The detail on the top of the dress is made from lots of pieces put together, meaning I had some pretty thick sections to go through, but that was no problem either. The dress is the, sewn up in a polyester shantung from Jo-Ann Fabrics. The sweater is the, upcycled from a thrifted sweater, with the addition of puffed “princess” sleeves.

To see even more photos of the outfit as well as over two hundred pages of amazing sewn kids’ clothes inspiration, visit. I’ll be back on Friday with more photos and a tutorial for how to add puffed princess sleeves to any pattern – see you then! I have just found your website and thank you for your very helpful review. I have been sewing for many years on an inexpensive machine with zig zag and manual button hole.

I don’t sew a lot, mostly dolls clothes for my grand daughters using knit fabrics. My machine copes with a basic zig zag but tensions on stretch fabrics can be difficult. It is time to invest in a better machine so would you recommend a serger to use in addition to my machine or replace it completely with a better one in the $400 range. Not unfortunately the one you tested.

My current machine can go to my oldest grand daughter to continue the craft thru the generations. I took the plunge this year and bought a new sewing machine.

I went with a Viking and have been a much happy sewer since then. I’ve sewn for over 40 years and was always frustrated with the beginning stitch, jamming, always having to tie off threads, jamming I know I already said that.

My machine has many bells and whistles which I am still learning how to use. It’s cut my sewing time down immensely for repetitive tasks. It was expensive but a good investment for my business.

If you are serious about sewing I recommend an upgraded sewing machine. Hi Autumn, I came across your site tonight via Pinterest, as I was inspired by the re-style of the bargain sweat pants into a kangaroo pocket skirt. On topicI happened to be in Hancock Fabrics today, and had a short chat with a clerk about a sale they were having on sergers. I currently do not own one, but am always jealous of those people who do not need the “instructions if you do not have a serger” listed on most sewing instructions. The sales clerk mentioned that she has owned her own serger for over 12 years and has NEVER re-threaded the machine.

Years ago, her manager told her this simple tip: Set the tension to zero. Cut the old thread off near the spool; tie a simple knot with the new thread to the old; pull the knotted threads through; re-set the tension. Easy, and just one of the best sewing hacks I have ever heard! I will remember this for when I do buy the serger of my dreams. I hope this helps you as well.

Feel free to blog about it, if you wish. Having a more expensive machine can be worth it, however, maybe a distinction should be made in that you should have a higher quality machine over a low quality machine. What I mean to say is that some sewing machines are made with plastic gears inside as opposed to metal.

With any sort of heavy use (either material weight or length of time sewing) the machine is not going to fare well. I’m thinking those kid sewing machines that are $50. The machine doesn’t have to be fancy.

My first machine was industrial grade but only $100. I needed it to sew through 11 layers of upholstery grade fabric for historical costuming. It was a great little machine but it really needed to be dropped into a table to secure it as the vibrations would make it travel across the work surface. I ended up giving it to a friend when I got a quieter machine and it still works like it did when I first bought it 20 years ago. Antique machines that are properly serviced will work wonderfully in this regard.

The inside parts are made for long use. The machine won’t break down like newer ones do but they are severely limited in what their stitches can do. I’d recommend getting an older, high quality machine if you are on a budget.

When you can afford it, upgrade to something really nice that can do some fancy stitching but also is of high quality. Look out also for flaws in certain models of sewing machines. I got a really nice $600 non-computer machine but didn’t know about a common problem with the machine, namely that the housing of the bobbin would spin free and I would have to take it to a dealer to have them open the machine up and put it back in the right place.

It’s cost me $800 in repairs and has done it again. I can’t stand to spend any more money on it. Go for quality if you’re going to buy a machine and look up what problems users are having that the machine may have. I got my old Singer (which, admittedly, has only two bells and one whistle – it will do straight stitches, it zig-zags, and it has a combination of the two for hemming) when I graduated from Jr. I’m 60, and getting a bit fuzzy-headed – but you can do the math if you want to! It needed more than a little TLC.

I asked the repairman if I could get as good a machine new, if I spent what it would take to make mine run like new. He emphatically told me NO! My machine was made in Germany, not Japan or Korea, and its hefty weight is due to totally metal construction. There is NO PLASTIC on my Singer, anywhere. He told me that the design was better as well, in that the parts do not wear as much from use.

So I entrusted my old friend to him instead of trading it in. He replaced all the rubber wheels and belts, located a replacement for the missing thread guide post, cleaned and oiled the entire mechanism, adjusted thread tension, calibrated the feed dog – and threw in a set of needles for various fabrics, and a set of metal bobbins – all for under $150. My machine is now set to last at least as long as I can expect to be able to use it! I have no expectation of doing super-fine sewing, but I did sew a man’s suit – all 6 layers of the jacket, and a fully lined pair of pants – with this machine. And while I doubt I will ever sew 11 layers of upholstery fabric together, I did sew 4 layers of heavy-weight canvas with my Singer when making strap supports for a wall-mounted bookcase and I fully expect the machine to manage multiple layers of old-jean denim for a king-size quilt I have in the works!

I would strongly suggest an older Singer – even if you need it repaired or reconditioned – to anyone who wants a simple workhorse of a sewing machine. For most fabrications, for mending, for the occasional heavy-duty task, it offers a combination of simplicity and sheer strength that many of the newer machines cannot deliver, with a much lower price tag. A few years ago I splurged and got a better machine to replace my old inexpensive one. I was not initially looking to buy a new one, but my old one would not stay in time, and it wasn’t worth it to keep getting it repaired. I purchased a Janome 3160 QDC. Price was around $600. It makes sewing a dream!!

My mom just purchased the same machine for herself this summer and can’t believe how wonderful it is compared to her older inexpensive machine. I am partial to the Janome brand, but I guess the point I wanted to make was it is possible to get an excellent new machine with some bells and whistles for even under $1500. I agree with Pam, they could have made this model more attractive.

If I was Janome, I’d let you keep this one!! I was going to say the same thing about this Janome model. I bought it almost a year ago and I am so very happy with it. It works like a dream – even for sewing purses and you can lift the presser foot for thicker materials. It still has a lock stitch which is wonderful, and the price is more than a lot of amazon.com machines, but not as high as most high end machines. The only thing I kinda miss is it would be nice to have a font or two. But I highly recommend this model of Janome to anyone wanting a good quality machine without going inn the $1,000 range.

When my “middle of the road” Viking went into hospital, I bought the Janome 3160 QDP to get me through several quilts and to use as a traveller when the Viking came back. I love that machine. I have hardly used the Viking since.

Last week I used this new Janome at Quilt Market for a full day class. It was a really nice machine to use, but I like the 3160 better. It may not have quite as many stitches, but it has the bells and whistles, and it has been quite a workhorse for me. It is less expensive, and I have recommended it to several people. They tried to tempt me with a great deal on the cost of the Skyline at Market, but I am staying with the 3160.

The switch from budget to expensive for me in addition to and more importantly, was the sturdiness of the machine. It’s heavier and just a much stronger workhorse.

Pedal to the medalliterally. I can jam through projects and not feel like my machine is going to vibrate off the table. That being said, I would recommend to anyone on a budgeteven a starter, get an old bernina or other old all metal machine for a couple hundred bucks over a new plastic machine. I scored an old Bernina (for my daughter on an $85 budget machine) from a garage sale (with loads of feet!) for $40. I was originally looking for the 1008 on eBay for $300.

I normally use and love my Janome MC6500. I own 4 Janome machines. One is an older serger which I LOVE.

It works like a breeze and it’s really not that hard to thread when you remember how to do it! I also own a 10001.but I had to send it back to Janome to put an entire shaft inside!! What went wrong you asked? The only downside to this machine was that it did all those fancy stitches PLUS embroidery. I think the combination isn’t good for a “home” type machine. The gears are plastic and more likely to break – once replaced the machine NEVER runs the same because gears don’t match up ever again! But I am able to use the 10001 for the fancy stitches – I just stay away from the embroidery which seemed to be a problem.

However, I paid $1800 for the machine on “sale” so it was not the best option. Now I own two more – a BASIC janome that has a few fancy stitches, the buttonhole and a few other things. It’s basic but touchy – I have never been able to sew denim or thick materials. My other Janome is a 900 embroidery machine which I love.

However, Janome faded out their free embroidery software that came with the machine. Now you MUST purchase a Embird or another embroidery program to be able to download files and transfer to the machine!

So there are some negatives with Janome and paying a higher price for “technology”. I Am Alive Mp3 Song Free Download Celine Dion. I will always keep a back up metal singer machine so if I cannot afford to get them fixed, I have something to sew on! I know that as time goes on improvements are made and Janome has been one to stay on top of changesbut it’s just really hard to think about paying $2,000 for a sewing machine and then it break when you least expect it or you aren’t able to afford additional accessories!! I’m glad you like the new oneI will have to try it sometime.

I’m considering keeping all my 10001 feet/accessories and moving to a newer model that will hopefully last more than two years! 🙂 Also, google the new BABY LOCK serger – they have one that Nancy Z is endorsing that has 8 or 10 cones of thread!! It would make wonderful serging options. Personally I’m drooling over it!! Hi Lisa, What year is the Baby Lock that you have? I have one that is several years old but has never been out of the box! I also have the MC6600P which does embroidery and haven’t used that more than a total of about 8 times since buying it several years ago.

I am considering trading in at least the MC6000P for something that doesn’t have all the bells and whistles I don’t need. I was just wondering if you had any thoughts on the the MC6000P either. I am feeling overwhelmed with so many separate pieces on a single machine. Any thoughts would be greatly appreciated. Thanks so much, Karon. About 5 or 6 years ago I took the plunge and bought a Janome 1600. I had an older Singer and I was frustrated trying to quilt on it because it did not have a needle down feature which, for me, was really important.

I was nervous about spending $1000 on a machine (I watch my pennies pretty closely) but I bought my Janome and I could not be happier. I love that machine. The downside is that it is just a straigt stitch machine. Great for quilting because of the larger harp but still I was missing some other things so I bought a Brother CS6000i on Amazon. I love that little machine! So many different stitch choices, auto button hole maker, needle down, needle threader, feed dogs that drop, etc. I recently had to have my Janome serviced.

I took it to the best sewing machine repair folks in our area. The downside of that is that it is a Bernina dealership. As much as I would probably adore a Bernina high end machine, there will never be a time that I would feel comfortable spending $2000 much less $8000 on a sewing machineunless I won the lottery or found a very wealthy husband! I purchased a JanomeHorizon12000 about 2 years ago as I do embroidery and love every thing it is capable of doing. Yes it was expensive and I traded in a Janome 11000.They are both computerized I have the capability of a 9mm stitch width.

I had a Janome 2030 which I took to guild as it only weighs 12 pounds. The big 12000weighs almost 27 pounds. I do not like taking it every where. I was at the dealer store the day the Skyline arrived.

I had the opportunity to play I am going to tell you I was extremely impressed!! It also has the 9mm feet and is compatible with my12000. I do not think it looks bad at all!! I like what it is capable of doing.

This day and age sewing machines are like buying a car. You pay for the bells and whistles and as far as I am concerned you get what you pay for.

I am very much a Janome buyer and would not change. This is my personal feelings and my likes. Hello Autumn I posted a question a week ago and somehow it displayed as number 3 alongside the November posts. I doubt it you or anyone else saw it. I have been checking for a reply but none showing, so I will post again below. Thanks I have just found your website and thank you for your very helpful review.

I have been sewing for many years on an inexpensive machine with zig zag and manual button hole. I don’t sew a lot, mostly dolls clothes for my grand daughters using knit fabrics. My machine copes with a basic zig zag but tensions on stretch fabrics can be difficult. It is time to invest in a better machine so would you recommend a serger to use in addition to my machine or replace it completely with a better one in the $400 range. Not unfortunately the one you tested. My current machine can go to my oldest grand daughter to continue the craft thru the generations. Hello Autumn I posted a question a week ago and somehow it displayed as number 3 alongside the November posts.

I doubt it you or anyone else saw it. I have been checking for a reply but none showing, so I will post again below. Thanks I have just found your website and thank you for your very helpful review. I have been sewing for many years on an inexpensive machine with zig zag and manual button hole. I don’t sew a lot, mostly dolls clothes for my grand daughters using knit fabrics.

My machine copes with a basic zig zag but tensions on stretch fabrics can be difficult. It is time to invest in a better machine so would you recommend a serger to use in addition to my machine or replace it completely with a better one in the $400 range. Not unfortunately the one you tested. My current machine can go to my oldest grand daughter to continue the craft thru the generations. I have a pretty basic sewing machine as well and I don’t love how it copes with knits.

My serger does a MUCH better job, so I use it a ton when I sew with knits. I would love a better sewing machine, but I’m not sure I’d give up my serger to get one, so I guess my recommendation would be to go for the serger now, and then try to upgrade the sewing machine in a few years. (That’s assuming that your machine still does ok for the most part.) I guess another option would be to get a newer budget machine like this one for $150: AND get a basic serger, like this one for $200: good luck with whatever you decide! Another thing to do, is keep an eye on Craigslist, a couple if years ago I bought a Babylock Eclipse for $500. It was in mint condition.

It took me a while to find it, but it was WELL WORTH IT! I just kept checking everyday, I wasn’t in too much? Of a hurry to find a Babylockjust be sure to check it out with a friend (for safety). The lady who sold me hers, had it all set up with different materials for me to try. She had recently upgraded her Eclipse, unbeknownst to her hubby.

Totally my gain!!!? Hi, Thanks so much for this review. My 18 year old computerized elna has pretty much had it and I regrettably purchased a heavy duty singer machine for $500 which turned out to be average at best. I really should have saved the money and replaced the elna with another computerized machine. It looks like you have sewn fine slippery fabrics with ease, which is what I need. But I also need to sew heavy upholstery fabrics (I have a cushion fetish). I think if it’s a good machine it is pretty good value as you can pay thousands for sewing machines!

You will get what you pay for in a sewing machine every time. If you want precision, buy an old Bernina until you can afford a better one. Insist on a true Bernina if you buy a new one, not a Bernette knockoff. At least a 3 series.

If you need bang for the buck, Pfaff is the only way to go. More stitches, a built in walking foot, prices start at about 699. Babylock is the most user friendly sewing machine made, again move at least one step up the ladder, maybe a Rachel. Alot of people, and I mean alot, of people love their Janomes.

Once again, move up the line, you will never regret moving up. 0% financing is still available most places, and you will never, ever regret it. Go to a reputable dealer, Ask around, if you feel like you aren’t getting the service you deserve, look around. And NEVER, EVER buy a sewing machine online. Sorry, probably steps on toes, but that is the truth. I completely agree with you! I had a starter machine when I first got married, and it was great.

I used it to make lots of curtains and a few simple garments. As I started getting into more complicated things, I would become increasingly frustrated. I thought it was my inexperience. It had gotten so bad, I had completely stopped sewing.

At the advice of some older, wiser family and friends, I decided to invest in a better machine. It was like night and day! The machine I bought is not top of the line, but probably a middle range, and like you, I realized that almost all of my frustrations with sewing were from having a machine that could not handle what I wanted to do. Thanks for sharing your experience, and I hope they let you keep the machine. Your daughter’s dress is beautiful. I tried the Janome Horizon and had nothing but trouble – After two years and many bobbin holder purchases, I couldn’t stand it and traded this in for a Juki.

What a difference – no more explosions while sewing. The Horizon really sounded like it was exploding every time that the bobbin holder broke (can remember this happening at least five times). Janome refused to do anything. Glad that you had good luck with this machine, but I will never purchase a Janome product again. I reached your blog from Pinterest.

Firstly I thank you for sharing this review with us, the readers. I was actually looking for reviews for Elna eXcellence 680, which in fact proved to be exactly the same machine as this one in review: Janome Skyline S5. Now I believe I’ll make this investment in this model. Unfortunately I don’t have Janome shop in my country (Greece), so I must go with the Elna’ s model, which I found it in Romania. I was between Pfaff Expression 2.0, Husqvarna Viking Opal 670 and Elna 680, but because Elna is newer model, I believe I’ll go with it. Husqvarna has 5 years warranty, but reading a review like yours on another website, I learned a lot about some issues you may encounter.

What about the Pfaff, since Singer bought them, their reliability is disappointing. I had a Bernina Bernette Sublime Chicago 7. Well on sewing the machine went perfect. But I had trouble with the embroidery module, so I sent it back for warranty. Finally the answer was they will make a refund. So I said I’ll buy a dedicated embroidery machine, but next year. This year I must have a little patience and make some economies so that I’ll afford to buy this Elna 680/Janome S5.

One thing I’d recommend if you’re looking to upgrade or buy a nice quality machine, is to look for either end of season sales or consider a used machine. I got a very nice quality Janome about ten years ago on sale for $600, from $1100 full price. It’s an outstanding machine that I sew on almost every day. I don’t know what I’d do with out it. There is a quilt shop near my home that sells used machines sold by wealthy women who get a new machine every couple of years and always buy top of the line- so they are good machines and barely used, really.

Maybe there is something like that in your area? I would ask around to your local quilt and fabric shops and see if they can help you. A high-end machine is a much better bargain! I don’t know anything about Janome machines, so I cannot speak to them, but the question wasn’t really about “Should I buy a Janome high-end machine?” After many years of using a Sears machine that came out just before they started offering a free-arm, I finally purchased a Husqvarna. In addition to the comments made, what I love are the many different pressure foot devices for different applications and the ability to change the position of the needle right or left to accommodate different seam allowance widths. I would love to be in the position of trying out new machines. What a fun and valuable experience you’ve had!

Probably no one will scroll down this far, but here goes anyway! I like the comment of quality, rather than price, being what we need to look for. Vintage machines are much better quality than a new machine, and usually cheaper. New machines are made to be disposable, not to last, no matter how many bells and whistles they have; whereas most vintage machines will last forever with proper oiling. I have over 40 machines, old and new, and I know what I’m talking about.

Great machines to look for: Bernina 930 or 830 or 1008, pre 1960s Singers, and the made in Japan, 158 series, Kenmores. My oldest is from 1909 and still running strong. I have one computerized machine that gives me more problems than the rest put together, and it is a good quality Janome. Trust me, go vintage! I read the latest comments. You who recommended a vintage or fully mechanical machine, you are so right.

I live in Europe and here in Greece this culture of Quilting/Patchworking it is not so popular, altough they exists some clubs, but far away from my location. For this reason the market is not very rich in sewing machines diversity. I need the decorative stitches for my creations. And a mechanical or semi-mechanical can’t offer more than 30-40 decorative stitches. Since I wrote the first message I was able to make some economies and my WishList became bigger, because I became interested in Pfaff Expression line machines (3.2/ 3.5 / 4.2) because of the IDT system and many decorative stitches (and 5 years warranty) and of Elna Excellence 760EX. The last one is above my economical power, but you can never know. I also reviewed the Husqvarna Viking 690Q / 960Q and Brother innov-IS 1300 / 1800Q.

But I think I’ll go with Pfaff Expression 4.2 What do you think? PS: I ocassionaly review your comments so you can give me a litlle help. We’re considering Janome S5 or%7 machines for my wife who is a beginner. No question the S7 is a more feature filled machine and a much nicer display. The accuefeed seem a real nice useful feature but doesn’t come on the S5. What concerns me is all that pre- programming.

It seems disproportional to the actual sewing time. In other words setting things up manual seems faster and easier at times. Sprint Galaxy Note 2 Firmware Update Download.

With a thousand features which machine is really more user friendly? That said if you do a lot of repeat work then programming a procedure once makes sense sewing, time then is much easier and faster. Having all these variable options is nice but may add to the work load Granted when the time comes when you need a feature its always nice to have it at your disposal. The simpler S5 does a lot after all and seems simpler.