If you have not used Pinnacle Studio before, we recommend that you keep the user guide handy for reference even if you don't actually read it all the way through. Note: Not all features described in the user guide are included in all versions of Pinnacle Studio. Primary Non Contributory Endorsement Isotretinoin more. For more information, please visit www.pinnaclesys.com and. Pinnacle Studio MovieBox HD Video Capture System with Software ALL IN SEALED BOX. PINNACLE STUDIO MOVIEBOX USB VERISON 9 REFURBISHED NO SOFTWARE. The Studio MovieBox Ultimate USB Video Capture System from Pinnacle is a USB video capture device with analog and di.

Archived from groups: rec.video.desktop,rec.video,alt.video.dvdr,comp.sys.ibm.pc.hardware.video,alt.video.dvd () I want to burn my VHS home movies to DVD. As a first step, yesterday, I purchased, from Fryes, a reconditioned: Pinnacle Studio MovieBox DV (Movie Box DV hardware & Studio 9 software for $245 US dollars + California sales tax of 8.25%.

A) I correctly wired the 3 VHS VCR RCA outputs to the Pinnacle MovieBoxDV white-red-yellow composite analog video input port; and I correctly wired the Pinnacle MovieBox DV output 6-pin-to-4-pin firewire to the WinXP laptop's firewire input port. B) I inserted a VHS home video tape & pressed the PLAY button on the VCR (having tested with a TV that the VCR was outputting the desired movie). C) Windowx XP automatically started Pinnacle Studio version 9 on my IBM A31p laptop when I plugged in the 4-pin firewire connection. Yet, after three hours of testing & reading the manual, absolutely nothing shows in the Pinnacle Studio version 9 preview pane!

Archived from groups: rec.video.desktop,rec.video,alt.video.dvdr,comp.sys.ibm.pc.hardware.video,alt.video.dvd () oraklistal@yahoo.com (Orak Listalavostok) wrote in news:44d113e9.c37f12d@posting.google.com: >I want to burn my VHS home movies to DVD. >>As a first step, yesterday, I purchased, from Fryes, a >reconditioned: >Pinnacle Studio MovieBox DV (Movie Box DV hardware & Studio 9 >software >for $245 US dollars + California sales tax of 8.25%. >>a) I correctly wired the 3 VHS VCR RCA outputs to the Pinnacle >MovieBoxDV >white-red-yellow composite analog video input port; and I >correctly wired the Pinnacle MovieBox DV output 6-pin-to-4-pin >firewire to the WinXP laptop's firewire input port.

>b) I inserted a VHS home video tape & pressed the PLAY button on >the VCR >(having tested with a TV that the VCR was outputting the >desired movie). >c) Windowx XP automatically started Pinnacle Studio version 9 on >my >IBM A31p laptop when I plugged in the 4-pin firewire >connection. >>Yet, after three hours of testing & reading the manual, absolutely >nothing shows in the Pinnacle Studio version 9 preview pane! Archived from groups: rec.video.desktop,rec.video,alt.video.dvdr,comp.sys.ibm.pc.hardware.video,alt.video.dvd () Orak, I assume the Movie Box DV is designed to take your VHS signal, convert it to DV and send it to your computer via your Firewire connector. If this is the case, you have almost everything set up wrong.

First, read the manual and follow the diagrams on how to set up your hardware and then Studio 9. You have the proper cables going from your VCR to the Movie box, then the DV signal going to your computer. If the Movie box is converting the VHS composite and audio signals to DV, then your computer will see a DV 'camcorder' attached to the Firewire input.

HOWEVER, it will be the equivalent of a non-controllable DV device, such as a Digital 8 Camcorder, or any other analog to DV converter. THEREFORE, you must set Studio 9 to capture DV without device control. Again, read the manual and it will tell you how to use the SETUP menus and then switch to the Capture window. Since you will not have device control, you will have to start and stop your VCR by hand. Cue your tape to a few seconds BEFORE where you want to capture, so that you have a signal coming into your computer/Studio, then click Start Capture in Studio (You'll have to give your capture a name unless you want it named Video 1, or whatever is the default in Studio 9, then click OK and start capturing.

BUT AGAIN, it the Movie box is actually converting your signal to DV, you will need to capture to DV and convert to MPG (if that is what you want) unless you want to try and convert to MPG on the fly, which is not recommended. If you really want to capture in MPG, you should take the Movie box DV back and get a hardware VHS to MPG converter, which will probably connect to your computer through a USB1 (bad) or 2 (better) connector.

Finally, go to the Pinnacle Studio 9 webboard and seek additional help, after you've read the manual. Hope this helps, Susan PS, the 'recommendation' from Fry's was that you give them money, not that the Pinnacle was recommended.

Oraklistal@yahoo.com (Orak Listalavostok) wrote: >I want to burn my VHS home movies to DVD. >>As a first step, yesterday, I purchased, from Fryes, a reconditioned: >Pinnacle Studio MovieBox DV (Movie Box DV hardware & Studio 9 software >for $245 US dollars + California sales tax of 8.25%.

>>a) I correctly wired the 3 VHS VCR RCA outputs to the Pinnacle MovieBoxDV >white-red-yellow composite analog video input port; and I correctly >wired the Pinnacle MovieBox DV output 6-pin-to-4-pin firewire to the >WinXP laptop's firewire input port. >b) I inserted a VHS home video tape & pressed the PLAY button on the VCR >(having tested with a TV that the VCR was outputting the desired movie). >c) Windowx XP automatically started Pinnacle Studio version 9 on my >IBM A31p laptop when I plugged in the 4-pin firewire connection. >>Yet, after three hours of testing & reading the manual, absolutely >nothing shows in the Pinnacle Studio version 9 preview pane! >>Despite the frustrating error message (see below): >- 'Setup->Capture Source' is set to 'Capture devices': >Video = MovieBox DV Analog >Audio = MovieBox DV Analog >TV Standard = NTSC >Aspect Ratio = 4.3 >Drive C Read Data Rate = 13049 Kbyte/sec >Drive C Write Data Rate = 10935 Kbyte/sec >Capture Format = MPEG preset @ High quality (DVD) If the Movie box DV is a DV conversion device, your computer will see it as a DV camcorder, and that is what Studio will have to see also. >>Still I get the (contrarian) frustratingly insipid error message below, >despite the fact I've repeatedly checked all connections, set the >'Diskometer' to 'Composite' and 'S-Video' back & forth numerous times >(leaving it on 'Composite' where it belongs for copying VHS tape to disk).

Again, you are NOT trying to capture analog VHS, you are trying to capture a DV signal from the Movie box. >>Still, I get the production stopping Pinnacle Studio version 9 error: >>Capture Device Initialization Error: >Pinnacle Studio is trying to initialuze a DV or Digital 8 Camcorder >via a 1394 port. >>If you are trying to capture analog video: >1.

Click on Setup->Capture Source and select the correct video capture device. Open the left hand panel on the Diskometer (capture controller.) and set >the correctd analog video input port (Composite or S-Video). >>If you are trying to capture from a DV or Digital 8 Camcorder: >1. Make sure our camcorder is turned on, is in VTR/VCR/Play mode, and is >connected to the 1394 port on the computer. Again, THIS is what you are trying to do. >>Any ideas why Pinnacle Studio 9 insists on seeing a digital device on the >firewire instead of its own MovieBoxDV hardware (supplied with the software)? >>Yes, I registered the product & activated the MPEG-2 codec unlock by >obtaining an activation key from the Pinnacle Studios site & entering >it into the form Help->Enter Activation Key.

>>Since the unit was reconditioned by Fryes, do you think it's busted (I have >only 15 days plus this has software so I don't know if there's a restocking >fee). I'd rather the darn thing just work. >>Is anyone successful on an IBM A31p laptop with recording from VHS to the >laptop using Pinnacle Studio version 9 & the Pinnacle MovieBox DV unit? >Have you seen this annoyingly frustrating problem before?

>>Orak Listalavostok. Archived from groups: rec.video.desktop,rec.video,alt.video.dvdr,comp.sys.ibm.pc.hardware.video,alt.video.dvd () 'Susan' wrote in message news:e3sub01asrk5sgetvdrqgknlf6be4rql4v@4ax.com. >Orak, >>I assume the Movie Box DV is designed to take your VHS signal, convert >it to DV and send it to your computer via your Firewire connector.

>>If this is the case, you have almost everything set up wrong. >>First, read the manual and follow the diagrams on how to set up your >hardware and then Studio 9. You have the proper cables going from >your VCR to the Movie box, then the DV signal going to your computer.

>If the Movie box is converting the VHS composite and audio signals to >DV, then your computer will see a DV 'camcorder' attached to the >Firewire input. HOWEVER, it will be the equivalent of a >non-controllable DV device, such as a Digital 8 Camcorder, or any >other analog to DV converter. >>THEREFORE, you must set Studio 9 to capture DV without device control. >Again, read the manual and it will tell you how to use the SETUP menus >Download Summertime By The Jamies Youtube Broadcast. and then switch to the Capture window. Since you will not have device >control, you will have to start and stop your VCR by hand. Cue your >tape to a few seconds BEFORE where you want to capture, so that you >have a signal coming into your computer/Studio, then click Start >Capture in Studio (You'll have to give your capture a name unless you >want it named Video 1, or whatever is the default in Studio 9, then >click OK and start capturing.

>>BUT AGAIN, it the Movie box is actually converting your signal to DV, >you will need to capture to DV and convert to MPG (if that is what >you want) unless you want to try and convert to MPG on the fly, which >is not recommended. >>If you really want to capture in MPG, you should take the Movie box DV >back and get a hardware VHS to MPG converter, which will probably >connect to your computer through a USB1 (bad) or 2 (better) connector.

>>Finally, go to the Pinnacle Studio 9 webboard and seek additional >help, after you've read the manual. >>Hope this helps, >>Susan >>PS, the 'recommendation' from Fry's was that you give them money, not >that the Pinnacle was recommended.

>>oraklistal@yahoo.com (Orak Listalavostok) wrote: >>>I want to burn my VHS home movies to DVD. >>>>As a first step, yesterday, I purchased, from Fryes, a reconditioned: >>Pinnacle Studio MovieBox DV (Movie Box DV hardware & Studio 9 software >>for $245 US dollars + California sales tax of 8.25%. >>>>a) I correctly wired the 3 VHS VCR RCA outputs to the Pinnacle MovieBoxDV >>white-red-yellow composite analog video input port; and I correctly >>wired the Pinnacle MovieBox DV output 6-pin-to-4-pin firewire to the >>WinXP laptop's firewire input port. >>b) I inserted a VHS home video tape & pressed the PLAY button on the VCR >>(having tested with a TV that the VCR was outputting the desired movie).

>>c) Windowx XP automatically started Pinnacle Studio version 9 on my >>IBM A31p laptop when I plugged in the 4-pin firewire connection. >>>>Yet, after three hours of testing & reading the manual, absolutely >>nothing shows in the Pinnacle Studio version 9 preview pane! >>>>Despite the frustrating error message (see below): >>- 'Setup->Capture Source' is set to 'Capture devices': >>Video = MovieBox DV Analog >>Audio = MovieBox DV Analog >>TV Standard = NTSC >>Aspect Ratio = 4.3 >>Drive C Read Data Rate = 13049 Kbyte/sec >>Drive C Write Data Rate = 10935 Kbyte/sec >>Capture Format = MPEG preset @ High quality (DVD) >>If the Movie box DV is a DV conversion device, your computer will see >it as a DV camcorder, and that is what Studio will have to see also.

>>>>>Still I get the (contrarian) frustratingly insipid error message below, >>despite the fact I've repeatedly checked all connections, set the >>'Diskometer' to 'Composite' and 'S-Video' back & forth numerous times >>(leaving it on 'Composite' where it belongs for copying VHS tape to disk). >>Again, you are NOT trying to capture analog VHS, you are trying to >capture a DV signal from the Movie box. >>>>Still, I get the production stopping Pinnacle Studio version 9 error: >>>>Capture Device Initialization Error: >>Pinnacle Studio is trying to initialuze a DV or Digital 8 Camcorder >>via a 1394 port.

>>>>If you are trying to capture analog video: >>1. Click on Setup->Capture Source and select the correct video capture device. Open the left hand panel on the Diskometer (capture controller.) and set >>the correctd analog video input port (Composite or S-Video). >>>>If you are trying to capture from a DV or Digital 8 Camcorder: >>1.

Make sure our camcorder is turned on, is in VTR/VCR/Play mode, and is >>connected to the 1394 port on the computer. >>Again, THIS is what you are trying to do. >>>>Any ideas why Pinnacle Studio 9 insists on seeing a digital device on the >>firewire instead of its own MovieBoxDV hardware (supplied with the software)? >>>>Yes, I registered the product & activated the MPEG-2 codec unlock by >>obtaining an activation key from the Pinnacle Studios site & entering >>it into the form Help->Enter Activation Key. >>>>Since the unit was reconditioned by Fryes, do you think it's busted (I have >>only 15 days plus this has software so I don't know if there's a restocking >>fee). I'd rather the darn thing just work. >>>>Is anyone successful on an IBM A31p laptop with recording from VHS to the >>laptop using Pinnacle Studio version 9 & the Pinnacle MovieBox DV unit?

>>Have you seen this annoyingly frustrating problem before? >>>>Orak Listalavostok >>I thought that the DV version of the MovieBox is for playing Digital Video, through a camcorder attached to the moviebox device.If you're running tapes through a VCR, you need the version of Moviebox labeled USB. I use a VCR attached to the Moviebox USB and I have no problems at all. Archived from groups: rec.video.desktop,rec.video,alt.video.dvdr,comp.sys.ibm.pc.hardware.video,alt.video.dvd () >>I assume the Movie Box DV is designed to take your VHS signal, convert >>it to DV and send it to your computer via your Firewire connector. I finally called a series of Pinnacle Systems' support sites, starting with the one in Mountain View CA at 650-526-1600 and ending with a support technician telling me to 'return the MovieBox DV to Fryes' (who apparently does NOT recondition these things at all). Pinnacle didn't even care about the error message because the hardware test failed.

That is, when I wired the VHS player (even with the VHS deck turned off) red/white/yellow wires into the input RCA jacks of the 'Pinnacle MovieBox DV' unit & set the 'Select' button correctly, the appropriate LED input indicators did not light. This, Pinnacle support said, was a clear indication of a bad MovieBox DV unit. Since it was my dime, I also asked if my Pinnacle Systems hardware MovieBox DV converted analog composite video to digital avi or to digital MPEG-2; they said NONE of their consumer units performed hardware conversion to MPEG-2 - that is, they convert to avi & let the Pinnacle Studio 9 software do the conversion of avi to mpeg 2.

This struck me as wierd. Anybody (with a digital DV camcorder) could simply play any VHS tape out the RCA jacks into that existing camcorder with the firewire inputs set to straight-through output to perform the same task as I just paid 250 bucks for. No additional hardware needed! Archived from groups: rec.video.desktop,rec.video,alt.video.dvdr,comp.sys.ibm.pc.hardware.video,alt.video.dvd () On 13 Jun 2004 00:32:51 -0700, oraklistal@yahoo.com (Orak Listalavostok) wrote: >>>I assume the Movie Box DV is designed to take your VHS signal, convert >>>it to DV and send it to your computer via your Firewire connector. >>I finally called a series of Pinnacle Systems' support sites, starting >with the one in Mountain View CA at 650-526-1600 and ending with a >support technician telling me to 'return the MovieBox DV to Fryes' >(who apparently does NOT recondition these things at all). >>Pinnacle didn't even care about the error message because the hardware >test failed.

That is, when I wired the VHS player (even with the VHS >deck turned off) red/white/yellow wires into the input RCA jacks of >the 'Pinnacle MovieBox DV' unit & set the 'Select' button correctly, >the appropriate LED input indicators did not light. This, Pinnacle >support said, was a clear indication of a bad MovieBox DV unit. >>Since it was my dime, I also asked if my Pinnacle Systems hardware >MovieBox DV converted analog composite video to digital avi or to >digital MPEG-2; they said NONE of their consumer units performed >hardware conversion to MPEG-2 - that is, they convert to avi & let >the Pinnacle Studio 9 software do the conversion of avi to mpeg 2. The same applies to other analog to DV capture devices using firewire. By emulating a camcorder, they greatly simplify the requirements to capture video -- and DV camcorders play DV, nothing else (as far as what goes on tape and over firewire). >This struck me as wierd.

Anybody (with a digital DV camcorder) could >simply play any VHS tape out the RCA jacks into that existing camcorder >with the firewire inputs set to straight-through output to perform the >same task as I just paid 250 bucks for. No additional hardware needed! Not if they had a camcorder which didn't pass through analog video, which is pretty common in EU and not uncommon on some models elsewhere. The other thing is to let you hoop up your analog VCR without needing a digital camcorder, especially useful if you want to convert a lot of VHS or other analog material without tying up the camcorder. But such devices aren't necessary if you have a DV camcorder with analog ins, and don't mind using it that way.

The only other thing is that some non-DV output devices *do* capture directly to mpeg2 (using hardware capture chips), or can capture to higher data rates/lower compression than DV. But to do that, the device has to provide its own capture software, because while DV devices are strongly standardized, and the OS supports capture from them easily, the others are essentially proprietary to the maker, using the maker's drivers and hardware to do the task. AFAIK, the MovieBoxDV is DV only, same with the similar Canopus product. Archived from groups: rec.video.desktop,rec.video,alt.video.dvdr () In article, oraklistal@yahoo.com (Orak Listalavostok) wrote: >>>I assume the Movie Box DV is designed to take your VHS signal, convert >>>it to DV and send it to your computer via your Firewire connector.

>>I finally called a series of Pinnacle Systems' support sites, starting >with the one in Mountain View CA at 650-526-1600 and ending with a >support technician telling me to 'return the MovieBox DV to Fryes' >(who apparently does NOT recondition these things at all). >>Pinnacle didn't even care about the error message because the hardware >test failed. That is, when I wired the VHS player (even with the VHS >deck turned off) red/white/yellow wires into the input RCA jacks of >the 'Pinnacle MovieBox DV' unit & set the 'Select' button correctly, >the appropriate LED input indicators did not light. This, Pinnacle >support said, was a clear indication of a bad MovieBox DV unit. >>Since it was my dime, I also asked if my Pinnacle Systems hardware >MovieBox DV converted analog composite video to digital avi or to >digital MPEG-2; they said NONE of their consumer units performed >hardware conversion to MPEG-2 - that is, they convert to avi & let >the Pinnacle Studio 9 software do the conversion of avi to mpeg 2.

>>This struck me as wierd. Anybody (with a digital DV camcorder) could >simply play any VHS tape out the RCA jacks into that existing camcorder >with the firewire inputs set to straight-through output to perform the >same task as I just paid 250 bucks for. No additional hardware needed!

>That is not true, not ALL camcorders have a passthru or ANALOG to DV conversion capability built in. Some even require you to record from the VHS to a DV tape in the camcorder first then do the transfer.

Some people also dont want to hook up and use an expensive camcorder as a conversion box. Also going the analog straight to MPEG2 doesnt get the best results if you plan on doing any editing.

Mpeg is already compressed and the results are poor. Archived from groups: rec.video.desktop,rec.video,alt.video.dvdr,rec.video.production,microsoft.public.windowsxp.video () Should do! You'll need to be careful over the av-in lead, did one come with the camcorder? Hopefully yes, otherwise you'll need the manufacturers one as the poles tend to be wired differently in different cams, assuming you have a miniJack av-in port.

If you don't have any of the studio software yet, you could use windows capture and then MM to edit. Don't use s-video unless you have a s-video vcr. Could use the dvd authoring software to do the mpeg2 conversion as well. Graham -- Graham Hughes MVP Digital Media www.simplydv.co.uk www.dvds2treasure.com 'Orak Listalavostok' wrote in message news:44d113e9.de0f915@posting.google.com. Archived from groups: rec.video.desktop,rec.video,alt.video.dvdr,rec.video.production,microsoft.public.windowsxp.video () 'Graham Hughes, MVP Digital Media' wrote in message news. >Could use the dvd authoring software to do the mpeg2 conversion as well.

I'm getting closer by the day; but I still have some 'issues' (like how to burn 8 Gbytes of MPEG-2 to a DVD with Studio 9.1). Here's where I'm currently stuck: I successfully played my store-bought 2 hour 35 minute VHS 'Gladiator' original from the VHS output into the JVC miniDV camcorder and out the JVC digital camcorder firewire into the IBM A31p firewire using Pinnacle Studio 9.1 (with MPEG encoding enabled) to save the resultant AVI file (30,719,448 KB) onto the laptop WinXP NTFS second hard disk. The first try, half way through capturing of the movie, the WinXP IBM ThinkPad crashed; the second attempt, just minutes from the end of the movie, MPEG-2 rendering of the AVI began without me doing anything! It (Studio 9.1) automatically created (seemingly on it own agenda) a 7 Gbyte MPG file; then it (Studio 9.1) removed the 30 Gbyte AVI file!

All that AVI data (30 gigs worth) was lost in an instant. I fussed with Studio 9.1 settings (realizing my original error in allowing MPG as the final output) and then 'captured' a smaller AVI of just the last few scenes of Gladiator, creating a 3 GB ending AVI (3,128,824 KB) of the last few scenes until the credits completed. I now had (only) a 7 GB MPG plus a 3 GB AVI of the Gladiator archive. Using the Pinnacle Studio 9.1 'Edit' GUI, I pasted together the first 7 GB MPG plus the final scenes' 3 GB AVI and then re-rendered (if that's what it's called) to a single MPG2 (again). The result (which took forever) was an 8 GByte MPEG2 file. QUESTIONS: My first question concerns the mixing of the MPG & AVI file. Did I have to re-render the WHOLE THING to MPEG-2 (which took forever)?

Could I have just rendered the much smaller last few scenes' AVI to MPG 2 and then simply COMBINED the two MPG files (large + tiny)? My second question revolves around how to burn this final 8 Gbyte MPEG-2 file to a normal DVD (about 4 1/2 gigabytes). Studio 9.1 says the file is too large to burn to DVD. Is there a way to tell it (Studio-9.1) to squish (compress) the MPG-2 file by 50%? I have Sonic RecordNow version 6.7.0 (which, I think, squishes to fit on DVD), but don't I need Studio-9.1 to first put the MPG2 file into a DVD 'image' before using Sonic RecordNow to burn to DVD?

If you understand my newbie VHS-to-DVD dilemma, please advise. If you need clarifying information of the stumbling block, please ask.

Orak Listalavostok. Archived from groups: rec.video.desktop,rec.video,alt.video.dvdr,rec.video.production,microsoft.public.windowsxp.video () 'Orak Listalavostok' wrote in message news:44d113e9.1515f9d0@posting.google.com. >'Graham Hughes, MVP Digital Media' wrote in message news.

>>Could use the dvd authoring software to do the mpeg2 conversion as well. >>I'm getting closer by the day; but I still have some 'issues' >(like how to burn 8 Gbytes of MPEG-2 to a DVD with Studio 9.1). Wait til dual layer discs arrive and buy a dual layer burner and a dvd authoring app that supports it.

>>Here's where I'm currently stuck: >>I successfully played my store-bought 2 hour 35 minute VHS 'Gladiator' >original from the VHS output into the JVC miniDV camcorder and out >the JVC digital camcorder firewire into the IBM A31p firewire using >Pinnacle Studio 9.1 (with MPEG encoding enabled) to save the resultant >AVI file (30,719,448 KB) onto the laptop WinXP NTFS second hard disk. >>The first try, half way through capturing of the movie, the WinXP IBM >ThinkPad crashed; the second attempt, just minutes from the end of the >movie, MPEG-2 rendering of the AVI began without me doing anything! >It (Studio 9.1) automatically created (seemingly on it own agenda) >a 7 Gbyte MPG file; then it (Studio 9.1) removed the 30 Gbyte AVI file!

>>All that AVI data (30 gigs worth) was lost in an instant. >>I fussed with Studio 9.1 settings (realizing my original error in >allowing MPG as the final output) and then 'captured' a smaller >AVI of just the last few scenes of Gladiator, creating a 3 GB ending >AVI (3,128,824 KB) of the last few scenes until the credits completed.

>>I now had (only) a 7 GB MPG plus a 3 GB AVI of the Gladiator archive. >>Using the Pinnacle Studio 9.1 'Edit' GUI, I pasted together the first >7 GB MPG plus the final scenes' 3 GB AVI and then re-rendered (if >that's what it's called) to a single MPG2 (again). >>The result (which took forever) was an 8 GByte MPEG2 file. >>QUESTIONS: >My first question concerns the mixing of the MPG & AVI file.

>Did I have to re-render the WHOLE THING to MPEG-2 (which took forever)? I believe so with studio. >Could I have just rendered the much smaller last few scenes' AVI to >MPG 2 and then simply COMBINED the two MPG files (large + tiny)? I think that it would still have wanted to render, as you would have a join. >>My second question revolves around how to burn this final 8 Gbyte >MPEG-2 file to a normal DVD (about 4 1/2 gigabytes). Studio 9.1 says >the file is too large to burn to DVD. Is there a way to tell it >(Studio-9.1) to squish (compress) the MPG-2 file by 50%?

Don't think it can, but I may be wrong, do you have any quality or time based options? As in pick low quality and it will fit on 2 1/2 hours? >>I have Sonic RecordNow version 6.7.0 (which, I think, squishes to fit >on DVD), but don't I need Studio-9.1 to first put the MPG2 file into >a DVD 'image' before using Sonic RecordNow to burn to DVD? I would have thought It should take a std dvd mpeg2 file, if not you'll have to get a dv-avi file and take it in. >>If you understand my newbie VHS-to-DVD dilemma, please advise. >If you need clarifying information of the stumbling block, please ask.

>>Orak Listalavostok Doing all this will reault in quite a poor quality movie to watch, probably worse than the vhs. It will never get better than vhs as this was how it started. You have compressed to mpeg2, compression will result in lower quality. You then compress heavily to fit on one disc, much poorer quality. Personally I'd watch the vhs!! Archived from groups: rec.video.desktop,rec.video,alt.video.dvdr,rec.video.production,microsoft.public.windowsxp.video () >>I'm getting closer by the day; but I still have some 'issues' >>(like how to burn 8 Gbytes of MPEG-2 to a DVD with Studio 9.1). >>Wait til dual layer discs arrive and buy a dual layer burner and a dvd >authoring app that supports it.

I'm surprised if Pinnacle Systems Studio 9 doesn't convert the MP2 to DVD. But, you're the expert, not me. Can someone doublecheck this supposition?

Another idea is to find a program on that converts MP2 files to DVD format on your hard disk so you can burn the resultant DVD image AUDIO_TS and VIDEO_TS directories to the top-level of the DVD. I think SmartRipper, version 2.41 can convert MP2 to DVD.

I'm not sure, but, DVDShrink 3.1.7 should compress DVD images. Both freeware programs should have pointers on the doom9 site. Archived from groups: rec.video.desktop,rec.video,alt.video.dvdr,rec.video.production,microsoft.public.windowsxp.video () terenachang@yahoo.com (Terena Chang) wrote in message news.

>Another idea is to find a program on that converts >MP2 files to DVD format on your hard disk so you can burn the resultant >DVD image AUDIO_TS and VIDEO_TS directories to the top-level of the DVD. I just asked a friend who converts home movies to DVD for a living.

He said you're stuck. He doesn't know of any program out there for amateurs that can convert any MP2 file (of any size) to DVD format. He's been asking Pinnacle Systems for years to do it for Studio. Instead of Pinnacle Systems Studio 9, he uses a $600 dollar professional capture/edit/shrink/burn program which can shrink the MP2 file down to less than 4.7 GBytes but even if you had that he told me to tell you there isn't any program out there for laymen to convert the 4.7 GByte MP2 file that results to DVD format. I think he called it 'DVD.iso' if I remember correctly.

Anyway, he said to let you know your best bet is to find a commercial operation that professionally converts home movies to DVD discs. It's not safe to do it yourself according to my good friend. If you send me email, I can forward his email & phone contact information. Bear in mind, I'm just passing this along.

I don't know for a fact whether this information is 100% correct or not. Archived from groups: rec.video.desktop,rec.video,alt.video.dvdr,rec.video.production,microsoft.public.windowsxp.video () In article, bob_bonda@yahoo.com (Robert A. Bonda) wrote: >terenachang@yahoo.com (Terena Chang) wrote in message >news. >>Another idea is to find a program on that converts >>MP2 files to DVD format on your hard disk so you can burn the resultant >>DVD image AUDIO_TS and VIDEO_TS directories to the top-level of the DVD. >>I just asked a friend who converts home movies to DVD for a living.

>He said you're stuck. He doesn't know of any program out there for >amateurs that can convert any MP2 file (of any size) to DVD format. >He's been asking Pinnacle Systems for years to do it for Studio. >>Instead of Pinnacle Systems Studio 9, he uses a $600 dollar >professional capture/edit/shrink/burn program which can shrink >the MP2 file down to less than 4.7 GBytes but even if you had that >he told me to tell you there isn't any program out there for laymen >to convert the 4.7 GByte MP2 file that results to DVD format.

>Bullshit, run it thru TMPGenc >I think he called it 'DVD.iso' if I remember correctly. >>Anyway, he said to let you know your best bet is to find a commercial >operation that professionally converts home movies to DVD discs. >It's not safe to do it yourself according to my good friend.

>If you send me email, I can forward his email & phone contact >information. Bear in mind, I'm just passing this along. I don't >know for a fact whether this information is 100% correct or not. Archived from groups: rec.video.desktop,rec.video,alt.video.dvdr,rec.video.production,microsoft.public.windowsxp.video () On Wed, 23 Jun 2004 21:34:11 GMT, glenzabr@xmission.com (GMAN) wrote: >In article, bob_bonda@yahoo.com (Robert A. Bonda) wrote: >>terenachang@yahoo.com (Terena Chang) wrote in message >>news.

>>>Another idea is to find a program on that converts >>>MP2 files to DVD format on your hard disk so you can burn the resultant >>>DVD image AUDIO_TS and VIDEO_TS directories to the top-level of the DVD. >>>>I just asked a friend who converts home movies to DVD for a living. >>He said you're stuck. He doesn't know of any program out there for >>amateurs that can convert any MP2 file (of any size) to DVD format. >>He's been asking Pinnacle Systems for years to do it for Studio. >>>>Instead of Pinnacle Systems Studio 9, he uses a $600 dollar >>professional capture/edit/shrink/burn program which can shrink >>the MP2 file down to less than 4.7 GBytes but even if you had that >>he told me to tell you there isn't any program out there for laymen >>to convert the 4.7 GByte MP2 file that results to DVD format. >>>>Bullshit, run it thru TMPGenc >>Right!

There are all sorts of software solutions for converting from one codec to another. I have several low cost proggies that do just that.(DVD shrink comes to mind for converting dual layer to single and allowing for compression control.) DR. Divx Winmpg converter DVD magic Imgtool DVD copy express >>>I think he called it 'DVD.iso' if I remember correctly. >>>>Anyway, he said to let you know your best bet is to find a commercial >>operation that professionally converts home movies to DVD discs. >>It's not safe to do it yourself according to my good friend. >>If you send me email, I can forward his email & phone contact >>information. Bear in mind, I'm just passing this along.

I don't >>know for a fact whether this information is 100% correct or not. Archived from groups: rec.video.desktop,rec.video,alt.video.dvdr,rec.video.production,microsoft.public.windowsxp.video () gothika wrote in message news. >>Bullshit, run it thru TMPGenc >>>There are all sorts of software solutions for converting from >one codec to another. >(DVD shrink comes to mind for converting dual layer to single >and allowing for compression control.) >- DR.

Divx >- Winmpg converter >- DVD magic >- Imgtool >- DVD copy express I think I bit off more DVD than I could chew, for starters. This happens to me a lot. I was haughty; I thought I could just burn hours of composite analog video in my first sessions. Well, my hypothesis was wrong. Burning large composite video to DVD isn't as easy as I thought it could be. But I'll get it. Archived from groups: rec.video.desktop,rec.video,alt.video.dvdr,rec.video.production,microsoft.public.windowsxp.video () >To test this new hypothesis, I will need to run this makeshift >Rube Goldberg TIVO system for a few hours to create a very >large (greater than 4.7 GB) VIDEO_TS/*.VOB DVD directory.

>>If Studio 9.1.2 then compresses that large VIDEO_TS DVD directory >as my hypothesis assumes, then others may successfully follow in >my (documented above) footsteps. Thanks to your help (especially the tons of advice that users sent to my email address) and a half-dozen experiments tweaking the software, I was easily able to successfully overcome that last hurdle of large amounts of data to be rendered to MPEG-2 and then to be compiled to DVD VIDEO_TS/*.VOB format under 4.7 GB in size. Using Pinnacle Studio 9.1.2, & having captured the data at full resolution, simply setting the output resolution to its lowest notch (of 3,000 Kbits/sec) still left 18 minutes of a 33 GB avi test file off the 4.7 GB DVD disc (i.e., only 131 minutes of captured video fit on a DVD disc at 3000 Kbits/sec resolution). Obviously, something more than just resolution needed to be modified. That key adjustment was simply to switch the Studio 9 DVD audio encoding format from PCM audio, to MPEG audio.

How does this work? Switching the encoding format for DVD audio from pulse code modulation, i.e., linear digital audio, at 16 bits per sample for two channels, at 48 (or 32 or 44.1) KHz, to MPEG reduces the storage requirements greatly - I even had 35 minutes free space on the DVD disc (150 minutes on disk at 40% quality). Extrapolating and stepping up the resolution bit by bit, we arrived at the optimal settings for fitting the 150 minutes of captured video to a single disk to be 3750 Kbits/second resolution, MPEG (vs PCM) audio encoding, & video filtering turned on. This provided 150 minutes on disc, with only 14 seconds free.

By tweaking these settings, the quality rose from 40% to 46%. Contraindications: - DVD video quality at 3750 Kbits/second (i.e., 46%) is not stellar. - Image sharpness is slightly reduced by the filter-video setting. - MPEG audio is required on PAL and, in practice, widely supported in NTSC video players; yet, it may not be universally supported. In summary, simply tweaking the Kbits/second settings did NOT do enough to fit a large (33 GByte, 150 minute) video to DVD; more needed to be done. A log of the experiments performed to date will be appended so that others may reproduce with the results shown. Orak Listalavostok.